We look at the new, affordable, and impressive bluetooth centred product: the iFi Zen Blue. We revisit another star when it comes to Bluetooth performance – the D-Stream WAMP-200SB digital integrated amplifier.
Getting Better Bluetooth
Bluetooth has a lot going for it as a wifi system – it’s simple, works almost anywhere and is as close as we come to a universal standard that works across brands, operating systems and regions. Yet the simplicity and ubiquity of bluetooth means it’s often seen as a compromise option. The arrival of a new and affordable bluetooth centred product – the iFi Zen Blue at just NZ$280 – will change this way of thinking. And it’s prompted us to have another look at one of the unsung heroes in our range that’s also a star when it comes to Bluetooth performance – the D-Stream WAMP-200SB digital integrated amplifier.
But let’s first talk about the new. iFi have been around for a while and have built up a suiteof small and reasonably affordable digital components – DACs, headphone amps and accessories. The new Zen Blue stands out in the iFi range for several reasons:
*It’s the first of a new generation of products with input from renowned audio designer John Curl The sprinkling of audiophile pixie dust over the Zen Blue may not have any impact on the mass market but for those of us that value sound quality, I can assure you from my own listening that this is a level of quality from Bluetooth that you will not have heard before and even better, it has applications in many different systems.
*The actual design and build quality of the Zen Blue is way ahead of anything else at this level – the sleek metal casework and solidity have me wondering how on earth they do this for the price.
*Finally the connectivity and how this allows us to better exploit the Zen Blue’s abilities are outstanding.
The Zen Blue is primarily a Bluetooth receiver but has both analogue and digital outputs. What sets it apart from everything else is the quality delivered from both (noting that there is switching between them).
It is by definition a DAC and so has the ability to convert the digital Bluetooth signal to analogue and does this with a high performance Sabre DAC chipset. Thus making it perfect for direct connection into any analogue system. It even comes with some quite reasonable connecting cables.
If you’ve wanted to take a leap into wireless connection from your smartphone to your system, but haven’t wanted to either change the actual components, or been reticent about either quality or simplicity of operation, the Zen Blue is the solution you have been waiting for.
It also features a new 4.4m balanced jack output option. This has applications with some active speakers and specialist amplifiers.
The internal DAC is very good, and it’s highly likely that in many lower cost or older systems where the amp may have both analogue and digital inputs (think almost all home theatre products) , that the Zen Blue delivers the highest performance via analogue.
Where the Zen Blue absolutely shines is when connected to a high quality system with digital inputs – especially the coaxial (RCA) option. Bluetooth has not been an option with many better amps and DACs, in part because of concerns of quality compromise relative to wired connections or networked wifi.
The evolution and proliferation of Bluetooth standards means for many designers it’s just too hard to include. When you see what iFi have done this becomes clear – ‘All current and future Bluetooth® audio formats are supported. This includes Qualcomm’s aptX and aptX HD, LDAC and HWA, hi-res Bluetooth® codecs created by Sony and Huawei respectively, AAC, Apple’s favoured format and SBC, the standard Bluetooth® codec.’
So yes – it will work in virtually any setting. And with the rapid improvements in the quality of streaming via Spotify, Tidal, Apple and more, there is no better time to make this jump. Not forgetting also that for music that you choose to buy and store, the levels of resolution are often well above CD.
The Zen Blue is, by a considerable margin, better than our previous solutions in every regard which is all the more impressive given the modest difference in cost.
Consider these specific applications:
Our very best DACs – the NuPrime Evolution and DAC-10 – don’t feature Bluetooth. But when connected to the Zen Blue via coax the sound quality from iPhone is remarkable – the music is free flowing and detailed. If it weren’t for our exposure to some truly high end digital options such as the Nativ Vita, I would be quite happy to have this as my primary digital source.
Both the NuForce DDA-100 and NuPrime IDA-16 are awesome digital amplifiers that don’t have Bluetooth – again, the Zen Blue is the perfect fit. Add to this a long list of other quality DACs and amplifiers such as Meridian, Wadia, Rotel, Cambridge and many more, and you can start to see the possibilities.
All this said, there are a couple of things the Zen Blue doesn’t do. The whole idea behind Bluetooth is that it’s a relatively simply system to use that ‘pairs’ with your smartphone.If you want multi-room or multi-source abilities then we should be talking about networked wifi systems and that’s a conversation we’re happy to engage in.
We’re happy to have your enquiry or order by Email
And if you want the performance of the Zen Blue into your speakers but have reservations about your existing amplifier, let’s look at the D-Stream option.
In a classic case of convergence both the Zen Blue and D-Stream WAMP 200 SB have little aerials and could be mistaken for modems. But the D-Stream, as well as having Bluetooth and several other inputs, both wireless and connected, is also a fully fledged amplifier that will outperform many existing analogue amps. Just as it’s easy to underestimate the performance of the Zen because of both low cost and size, the D-Stream is often overlooked in favour of bigger or more costly solutions. But its finish and build quality is even higher than the iFi and it offers control of all features via front panel or ap.
So – if looking to add the simplicity and performance high quality of bluetooth to an already capable system the Zen Blue is exactly what you need.
If wanting Bluetooth at this level, AND upgrading the overall performance of an older amplifier (not to mention a host of other features), taking the next step up to D-Stream makes even more sense.
Here are some end user reviews from Amazon – the D-Stream consistently gets 5 stars.
I took a chance without much knowledge of this product. I hooked the D-Stream up to my ELAC UB5 speakers and streamed some tunes from Tidal in high resolution.
All I can say is – it’s been quite a while since I have been this pleasantly surprised. The amplifier in the D-Stream is legit! I had to hear it to believe it. This is an amazing product for the money.
That’s one small amp for man, one giant leap for sound!
I really like this amp/streamer!
I’ve had it about a month now and have used it with Kef LS50 speakers (8 ohms), Elac UB5 speakers (4 ohms) and wharfedale Diamond 230 Floor standing speakers (8 ohms) and have enjoy the sound of all three sets of speakers hooked up to this. It’s clear, detailed, the bass is never boomy, and I never get tired of playing music on it (tidal hifi and Qobuz). Really, the sound of this thing is amazing!
I did have an issue with the remote not working. I reached out to the seller and they were very supportive. They even sent me a replacement right away without waiting for me to return the first one. The second on had no issue with the remote. Tops in customer service, I wish more companies were like them.
I’m giving it 5 Stars because it’s that good!
I would recommend you give it a try, worth the money!
Sound quality is my priority. The WAMP 200 is round & warm (not-digital sounding), but authoritative in bass. Very green – I notice no heat waste. Totally Wired reviewer says: “On sound quality alone, the innovative D-Stream WAMP-200SB stands as the best sub-$1000 amplifier I’ve had the pleasure of listening to.”
Well said. Very versatile with Hi Def streaming (wireless or Ethernet), Bluetooth, Toslink (electronically isolated), and analog line in. Front panel controls, remote and IOS controls all intuitive and effective. Set up was easy and sound is improving each day (warmer). I opted to leave power on constantly to accelerate maturation; seems to draw very few watts and produces zero apparent heat. Would be great if Version II has headphone out. Impressive product even in current configuration.
We’re happy to have your enquiry or order by Email
The new Well Tempered Labs Phono Stage is the product of several lifetimes in high end audio. In both absolute performance and value for money it is quite simply the best phono stage I have heard.
From the Wise Ones
The new Well Tempered Labs Phono Stage is the product of several lifetimes in high end audio – the primary designer is William Firebaugh, Chief Engineer at Well Tempered Labs (WTL from here on in). But there is also input from Frank Denson in New Zealand who, through his association with William, Dr Tominari from Dynavector Japan, Jonathan Davies (Australia) and Opera Audio in China, quietly stands at the centre. Frank has made this remarkable product happen.
Between them, Frank and William know more about turntables, cartridges and how to get the best out of analogue records, than I could ever hope to describe. For over 30 years Frank has encouraged my efforts and gently mocked me when I’ve taken wrong turns, but there is no-one in the audio industry I have greater respect for.
Last year I was sent a pre-production version of the new Well Tempered Phono stage – despite running the incorrect power supply to it, and being told next to nothing about how it should sound, what I heard made an indelible impression. Since then I’ve been waiting, sometimes impatiently, for the finished production units to arrive.
As a lifelong music and vinyl enthusiast, and owner of a good number of excellent phono stages over this time, I have to say the wait has been worth it. In both absolute performance and value for money (the WTL Phono is very reasonably priced and I’ll go into why this is so further into this article), it is quite simply the best phono stage I have heard.
This is an assertion that obviously warrants qualification but bear with me and I’ll explain why…
The design is, even if you lift the cover and look inside, deceptively simple. Let’s start with William’s own explanation pulled directly from the manual…
‘The necessary break points for the RIAA equalisation are distributed throughout the circuit in order to ensure optimum overall time response of the circuit as well as ensure the necessary frequency response. Normally the RIAA equalisation is effected with an arrangement of interconnected resistors and capacitors. Since the RIAA recoding process requires that the treble frequencies be substantially boosted relative to the bass frequencies, control of the time response is an important requirement.
The MM/MC Phone circuit employs state-of-the-art operational amplifiers. Using these devices ensures a low noise, high gain, stable and predictable design result.
I prefer using resistors of the carbon film type although metallic film resistors might have an edge for noise characteristics. I prefer capacitors with polypropylene dielectric.’
What this all means may not be self-evident to you so we’ll step through the three sections.
The process of making vinyl records is quite different from digital and the standards were set decades ago. In order to make both recording and playback work as a physical process, the frequencies of the original recording had to be significantly skewed – and then on replay this process has to be reversed. Doing this is a major part of phono stage design but for the most part, designers have simply adopted an orthodox approach and not surprisingly this means a lot of phono stages really don’t sound that much different from each other.
Go a step further and think about the broad range of frequency that records can store and cartridges can play back – effectively from 0hz to well over 60 kHz from even modest setups and how this is often truncated to a 20hz -20KHz range which has been arbitrarily set as both what we should be able to hear and a de-facto standard for most audio equipment.
Then consider that within these ranges the treatment of the signal may not be evenhanded – where this gets more conceptually difficult to grasp is the relationship of frequency (pitch) to time. Lower frequencies travel more slowly than high, and over the broad frequency range this creates a real issue – the sound will effectively be smeared, and as a simplistic example, the bass will be out of time with the treble.
William is one of the very few (and maybe the only) analogue audio designers to seriously address this and just in the same way that his turntables adopt novel and unconventional ways to solve issues of resonance and noise, this phono stage deals with both time and frequency rather than just the later.
This is why the Well Tempered phono stage makes such an immediate first impression – it does things in a markedly different way that gets us much closer to the original performance.
The second and third parts are more about component selection. The quality and choice of op-amps as solutions for amplifying music has improved dramatically over recent years, essentially as a by product of digital’s exponential development. The Well Tempered Phono stage takes advantage of this by using the very best available – this feeds into the end cost but I’ll explain shortly how the value side of things is maintained.
We then get to the section on the sound of the individual resistors and capacitors used in the circuit – this is something many designers of esoteric components make their primary selling point,and while I’m happy to believe that everything makes a difference (especially given my own experience with cables and connectors), this has to always be looked at as a ‘nice to do’ part of the process – each little part may well add to the end cost. So this has to be looked at in terms of the final product – does the sonic benefit justify both the cost and selection time involved?
That said, if I’m going to trust anyone to make these evaluations it’s people like William and Frank who have consistently delivered better sounding products.
Taken as a whole, the unique design and the cumulative effect of multiple small but significant component selections add up to an obvious and worthwhile performance advantage.
Design is one thing, manufacture is another. High end audio has long had an uneasy relationship with sometimes brilliant design but costly and inefficient implementation, often by extremely small (essentially one man) operations. This is often compounded by the need to sell products which means the ‘look’ and marketing end up being a big part of the end price.
The connection between Well Tempered Labs and the Opera Audio company based in China solves this issue. I know there can sometimes still be some bias towards different countries but China operates on a scale and level of efficiency that few in the west can grasp – they have a heritage of craftsmanship and a relationship with music that goes back in millennia, and a thriving audio industry that dwarfs both our local and most internationally recognised brands.
The fact is that just about every electrical component in a New Zealand, UK or US made audio product comes out of China or Asia. Building components at the source location therefore just makes sense if you are able to do it. So Well Tempered works with Opera who take care of building The WTL Phono Stage.
The physical design is intentionally straight forward – it’s a rectangular black metal box, no bigger or smaller than it has to be to accommodate the internals, and is finished to a standard above utilitarian, but not needlessly glitzy. The RCA sockets and connections are similarly non-branded but I have no doubt they have been selected with both sound quality and reliability as a priority. Thus you benefit directly from the economies of scale, with lower component and manufacturing costs. We also see a level of consistency and reliability which small operations struggle to match in the real world.
The two parts – innovative design and efficient manufacture come together to give you both sound quality and value.
For all this The WTL Phono Stage exists in a world where the percentage of people that will have both the means and the inclination to invest in serious analogue playback is limited. Yet the enjoyment provided is up there with the most hedonistic pursuits – but without the consequences. Within this small but enthusiastic market we are effectively a community where, if word of a better way of doing things gets around, we can all benefit. Which, in part, is why I’m going in to such depth.
Set up and matching.
Setting up the WTL Phono stage is very simple – the connections are straight forward with RCA in and out, and a press fit earth terminal that accepts bare wire. The 24 power supply is rather larger and heavier than usual and has a snuggly fitting 3 pin socket that locks in place. On the bottom there are two sets of dip switches– one for each channel.
The first 3 switches on each block set the gain (how much the WTL amplifies the sound) and so you are able to adjust for a wide range of cartridges both moving magnet and coil. I found the second and slightly higher setting to be best with the Nagaoka MP150 we first connected – it’s not often we have the luxury of being able to adjust gain with MM and it certainly proved worthwhile.
The next 3 switches adjust the loading impedance which is primarily a feature used with MC cartridges although the is a 47K ohm setting which is the accepted standard for MM.
It’s worth noting William’s comments in the manual on this – ‘there are many factors that contribute to the optimum loading of phono cartridges that include cable, preamplifier etc and we recommend starting with the lowest impedance setting closest to the manufactures recommendations’
‘In my experience, MC cartridges loaded with 47K ohms yield and excellent result and 47K is what I have used for some time now.’
For use with our low output MC – the Dynavector DV17Dx we set the gain to 1300 and impedance to 150 ohms – this gave a similar level of output to the Nagaoka MM and there were still 4 higher available gain settings. In other words the WTL Phono stage has more than enough output to match any low output moving coil cartridge AND drive any integratedor pre-amplifier to it’s optimum level.
There is a perception that you should exactly match cartridge and phono stage specifications in order to enjoy the best sound but this paints a simplistic picture.
As you have read above William has a preference for a much higher input impedance when listening to MC and if we look at another example with the NuPrime Evolution One power amplifiers which have an extremely high input impedance, there is certainly a good case to be made for this approach.
Often you’ll be told to select the option that sounds best yet when you try, it can be difficult to actually hear a worthwhile difference. I to, have found that fine tuning cartridge loading to be so subtle as to have just given up. But with the WTL, these selections have become much more obvious. The only conclusion we can come to is that with it’s higher resolution and transparency, we have crossed a threshold. As a by-product of this, I also re-assessed the set up of my turntable and found that it is even easier to hear small changes to the physical parameters such as arm height, damping and tracking weight. The end result is not just better performance through the sound of the phono stage, but a significant overall lift because it is now possible to fine tune in a meaningful and repeatable way.
William also recommends that you employ as good as possible interconnect cables with The WTL Phono Stage. For the output side we have found Keith Eichmann’s KLEI interconnects to be the best choice and with a range from around $350 to more than the cost of the phono stage there is plenty of choice. On the input side a little more experimentation may be warranted. Many turntables have their own cables and outside of upgrading the RCA plugs there may not be any options to change these.
The Sound of WTL Phono.
It’s always good to have a well regarded and long runningbenchmark from which to make any comparisons and the Dynavector P75MK4 serves this role – there is a relationship between the two designers and so we have no conflict in terms of outlining what the WTL does better, especially when many Well Tempered turntable owners are also Dynavector clients.
On moving magnet the WTL is dramatically better and it’s in this setting that both my pre-production and first listening of the finished unit is based.
With both higher quality moving magnets such as the Nagaoka MP, Ortofon 2M ranges and specialist cartridges such as the WTL TLC and high output moving coils such as the Dynavector DV10X5 & 20XH, there is absolutely a case for a superior phono stage.
The lower cost of these cartridges (when compared with most worthwhile moving coil options) is not a reflection of constrained performance but simpler construction. With the better units the stylus profiles are every bit as good as much more costly cartridges and the higher output delivers much better noise performance. MM cartridges are often better in terms of tracking ability and broad compatibility with various tonearms.
The WTL Phono allows MM cartridges to bloom and involve in a way I’ve never heard before – albums sounded like they had a completely remixed and improved production with entire threads of vocals and instrument lines being clearly revealed. There is pace, yet the music sounds more relaxed and flows with no hard edges (except where intentionally delivered). Percussion is remarkable with drum hits gaining impact but also seeming to be more realistic and organic – i.e. we hear the sound of a wooden drum stick hitting a skin rather than just an impact. The difference between a real drum kit and performer is distinct from the electronic version – yet the latter is even more clearly carried in the production and you can hear nuance that simply wasn’t there before.
The MM performance really stunned me – there were clearly things going on in there that were not previously revealed in a much more costly setup of both turntable and low output MC via the Dynavector P75MK4. Not only this, but both surface noise and any background hum was appreciably lower and it seemed that setup and matching was much easier.
Well Tempered have a history with Phono stages – the lower cost RIAA is still a current model and the TTP – a two box tube based design that was also MM only will have helped in providing a base to work from.
The easy switching between gain settings with the The WTL Phono Stage is immensely useful with MM – not only to deal with the varying outputs but also to work with the differing input sensitivity of preamplifiers. We are now able to fully optimise and gain a full dynamic range which rivals any MC system. This should be of particular interest to anyone with an Ortofon 2MBronze or Black.
The sound-staging is also remarkable. Again this has always been a selling point for MC over MM yet The WTL Phono Stage changed my perspective as to what is possible with even quite affordable moving magnets such as the Nagaoka MP-150. Combined with the extra dynamics afforded by correct gain setting and the remarkable lucidity, The WTL Phono Stage made me seriously question the higher endsystem we’ve assembled.
For a great many listeners, the results with a MM or high output MC will be all you could ever want. On a purely economic level, I’ve always appreciated the lower cost of many MMs and ease of stylus replacement. It is also clear that the combined cost of a good MM and the WTL at $2500-$3000, is less than that of many MCs and phono stage, and what I hear suggests that the former is by far the better option. Especially if you factor in the cost of stylus replacements over time. Remember we are always looking at an analogue combination as a whole – turntable, cartridge and phono stage (plus the connections).
The WTL makes the gradations between MM cartridges more obvious than I have previously found. There is a vast difference laid out between Nagaoka MP110 and 150 with the latter proving to be far more sophisticated in it’s rendition. The WTL TLC while based on the MP150 shows a much more articulate character and by turn the latest MKII version of the Dynavector DV10X5 delivers a cinematic soundstage by comparison.
All this taken into account, the potential with a high quality MC is greater again so the next question is how does the The WTL Phono Stage handle this relative to the Dynavector? In our own system, the match of the DV17DX cartridge and P75MK4 has been effectively optimised by the unique PE – Phono Enhancer – mode. And up until now, that really did seem as close to ideal as it was possible to get.
The Well Tempered again improves on the Dynavector P75 but in different ways.
The WTL Phono has a warmer overall sound with a more organic and realistic bass – percussionof all types is better handled with greater depth and impact and a far more convincing sense of texture.
Vocals are more intelligible – the P75Mk4 gives the impression of pushing vocals forward but I can now understand that the different bass qualities highlighted bythe WTL provides a more realistic overall balance.
Surface noise is definitely reduced with the WTL – the sound is more relaxed yet still has immediacy and bite when required. In some analogue systems I’ve heard surface noise effectively placed in the outer parts of the sound stage but with the WTL it is uncannily absent – I’m not quite sure what is going one here as the low level detail, especially the fades at the end of tracks are revealing a lot that I’ve never heard before.
The work done on the temporal front of the design is markedly more obvious with MC – the relationship between different instruments where each is voiced over different frequencies – for instance bass and lead guitar – is presented in a way that just makes far more sense. The musicians are playing together in terms of timing and it’s much more apparent that they are distinct instruments yet part of the same performance.
Subtle changes in tempo are much more obvious – be it a drummer shifting up a notch or the bass line being produced by a human rather than a machine.
As with MM the range of gain settings is broad and easy to change – you can do this quite happily while playing with no obvious clicks. And there is a truckload of gain on tap – as much as twice what we found optimal with the DV17DX and little NuPrime HPA-9 preamplifier. Overall the WTL will work with a broader range of cartridgesand amplifiers than the Dynavector.
Most importantly we have established that even with Dynavector cartridges and running in PE mode, the WTL Phono is still appreciably better. For other cartridges and in normal or MM mode the improvement is greater again.
None of this implies any sort of criticism towards the P75MK4 – it is a stellar performer given it’s cost and with each iteration the P75 has become markedly better.
But the way the WTL improves things in the time domain is obvious – the way the music flows anda greater sense of ease is one part but also the treatment of the leading edge of notes. The slight sense of edginess with the P75 is translated into a more nuanced and detailed approach.
On top of this I strongly suspect the more robust power supply and greater possible gain contribute to the impression of greater depth. The WTL has a linear supply whereas the P75 has a very special switching circuit, and while the P75 has predominantly small surface mount components, you can see larger more conventional parts within the WTL – William’s selection preferences and greater budget are likely to also play a part in the sonic differences.
There are some real paradoxes when comparing the new WTL Phono Stage with the Dynavector P75MK4. I get the feeling the Dynavector has been intentionally optimised for low output MC. But the WTL does amazing things with Moving Magnets that leave it for dead and in many ways take the performance of these lower cost cartridges to a level above the P75MK4 with many coils.
The WTL does certainly respond to low output coils of higher quality but the performance advantage over the P75 in this regard isn’t quite of the same magnitude – but this has to be taken in the context of this review only considering the DV17DX and P75MK4 in PE mode. It is highly likely that in other contexts the magnitude of theperformance jump will be at least the same if not higher than I’ve found with the MM comparison.
The Dynavector also makes LPs sound more consistent with each other – now I have another reference it appears that the P75 has a distinct colouration that overlays the sound of every record. The WTL stands in contrast by laying bare the differences in production values between records.
I’ve been listening to a very broad range of LPs while evaluating The WTL Phono Stage – some older (30+ years) LPs while revealing much detail that I simply never remember hearing are also sounding somewhat thin and compressed when compared to new pressings and productions. In part I feel that modern recording techniques – especially the software that is often used, have advanced recording quality. The standardisation of 24+ bit recording while obviously digital is enabling some fantastic productions from an incredibly broad range of artists.
Remembering that the whole analogue recording process does involve a level of manipulation because of the mechanics of vinyl production and the RIAA standard, the approach taken by William Firebaugh is proving advantageous to even digital masters.
And as I’ve suggested, the way in which the WTL works almost sounds like a new interpretation or re-mastering with many recordings – the difference is that great. While we don’t havea directly comparable phono stage or a master recording on hand to test the veracity of this idea, I do, in many cases have a reference back to the actual performances of the same bands and artists when seen live. It may come down to a gut feeling but for me, the WTL is the best I’ve heard yet in this regard. And by a good margin.
Unlike another product which I’ve recently reviewed that also has a distinct ‘live’ sound, the WTL is much more transparent and isn’t creating an overlay or character that gets in the way of the music. It does make the differences between productions more apparent rather than less but for the good ones that’s stunning. For the lesser ructions you’ll still get something but maybe not to the same degree.
That said, the unexpected reduction in surface noise is a real boon for record on even the most scrappy records. I’m really not sure why this seems to be a feature of the sound and normally this world suggest some kind of filtering but none is evident.
Unlike many other new components we have listened to the warm up period for The WTL Phono Stage doesn’t seem to be that obvious. This may have been obscured by changes we made between turntable systems and the changes of setup prompted by the greater resolution, but the qualities that convinced us in the first instance remain consistent. I do suspect that we are hearing subtle improvements in low level detail over time but the relative (and deceptive) simplicity of the circuit with fewer but high quality than many digital components would account for this.
The power consumption of the WTL is modest – just 20 watts so it barely runs warm and should be left on continuously unless the system is not going to be in use for a week or more. The lack of any switching is a fairly clear indication of the designers intentions.
While the Phono comes with a dedicated 24v power supply included, Well Tempered have released a new turntable power supply intended for the Amadeus 254GT, Royale and Versalex called the ‘Ctrl’ which has a 24v connection for the Phono and may well deliver even higher performance.
The new Well Tempered Labs Phono Stage sets new standards in both value and performance. The unique implementation of RIAA processing provides a new and better interpretation of vinyl record replay which is, paradoxically, most striking when applied to moving magnet systems. In doing so it causes us to question the assumption of placing precedence of the cartridge over the phono stage.
On top of this, The WTL Phono Stage also works it’s magic with low output moving coil cartridges, and with an extremely broad range of easy to adjust settings, is compatible and indeed optimal with virtually any phono cartridge and amplifier on the market today.
The WTL Phono is our best performing phono stage offering you real material value for money and build quality. It delivers exactly what the Well Tempered Labs promise – ‘new music from your records’, making analogue both relevant and viable for any enthusiastic music listener.
The Well tempered Labs Phono – NZ$2100 including GST and and delivery.
The new Cambridge Solo is the perfect introduction to analogue at just $295 inclusive.
The Well Tempered Labs RIAA ($610) is all about bringing high end analogue performance to the masses. The RIAA Phono stage is gusty little box. It is specifically designed for moving magnets such as Ortofon, WTL’s own TLC cartridge or high output MC cartridges like the Dynavector 10X5.
The Dynavector P75 MK4 ($1250) has been the go-to phono stage in New Zealand since it’s introduction in 2003. Over time we’ve seen a series of significant upgrades and now we’re thrilled to introduce you to the MK4. The new Dynavector P75MK4 is the most substantial re-working of the design with by far the greatest advance in performance.
The new Well Tempered labs Phono Stage ($2100) sets new standards in both value and performance. The unique implementation of RIAA processing provides a new and better interpretation of vinyl record replay which is, paradoxically, most striking when applied to moving magnet systems. In doing so it causes us to question the assumption of placing precedence of the cartridge over the phono stage.
Having just pumped out an in-depth 5500 word review that’s taken a good two months of listening, writing and editing, it’s quite a relief to finally hit ‘send’. Our typical client tends to hold on to a component or system for 20 to 30 years and often they will really stretch financially to make it happen, so it’s important that you have as much information as possible.
I’ve got a little list… there is such a thing as too much choice and it’s easy to get overwhelmed by all the alternatives. So we did the Kondo thing and asked ‘what sparks joy?’ Components with an identifiable and unique character that can deliver benefits in almost any system are what we all want, so here are our 10 best for 2019.
Welcome to the new year. In between some great beach walks (that’s the mouth of Blueskin Bay on a beautiful Christmas day in the pic above), we’ve been busy with exciting components and systems that are going to make this coming year so much more enjoyable for you…
Expressing your individuality – 2 different system choices:
In a one-size-fits-all world where every phone is basically the same, few things can be more individual than your choice of system to replay music in your home. The downside of this is that our choices can seem bewildering. So I’ve been doing some serious thinking about how we put togethera system – even then it’s a challenge to decide what we call it – a stereo or musicsystem, an AV media or surround system? Digital, analogue or both?
It’s become obvious that the old rules that were arbitrarily applied to system design just don’t work any more. Linn had a hierarchy of components starting from source but how does this work when the source is an iPhone? Wattage used to be the go-to specification for choosing speakers and amplifiers but with modern living loudness is hardly a desirableattribute – quality is what counts.
And if you have an existing system, will be the best solution be to upgrade a single component or just to replace as a means to the end of better sound?
With all these considerations in mind I’ve decided to highlight 2 quite different system choices that we’ve been enjoying over the last few months. Working from home has allowed us to spend much more time listening and really coming to grips with how components will perform in your own environment.
The first system centres on the new little French designed D-Stream WAMP-200 SB digital amplifier. This is a completely modern take on the idea of an entry level integrated amplifier and while intended to be a very simple to operate, there is a depth of features and flexibility that simply didn’t exist at any price a few years ago. That, and it sounds insanely good for very little.
The D-Stream hardly even looks like an amplifier – it’s a sleek and compact clamshell with two rear mounted wifi aerials that suggest in a completely reasonable way that this is essentially a network component first and foremost. So while the physical input and output array on the rear panel is modest, this is more than supplemented by wifi, Bluetooth and LAN connectivity and the entire world of possibilities that come with steaming services and shared music collections.
The D-Stream not only opens up all these channels for you, it is more than capable of making great sound with a wide range of speakers. Because it sounds so good, it will make low cost speakers sound better and allow you to build an easily affordable system that doesn’t skimp on quality or features.
But at the same time I’ll point out that the low cost of the D-Stream enables you to select speakers that are better than you might have otherwise allowed for. When carefully set up and connected in the same way we would with a high end amplifier, the D-Stream WAMP 200 SB is the literal giant killer.
As our suggested system, I’ve matched the D-Stream with a pair of rather nice trade in speakers – the Quad 12L.2s which have just come in – these shelf mount speakers have a generous and rich sound which builds on the D-Stream’s clarity and evenhanded presentation. Together they are easily our best sounding entry level system for just $1400 complete.
Now let’s take things up another level – System 2.
There is absolutely a place for a carefully put together component system where each part is purpose built. Because I’m continually evaluating new components I want a baseline system of high transparency at a realistic price point that reflects what I know many of you can afford. Simply put, I want to know that you’ll be able to hear what I do and that you’ll be able to trust what I write.
So I’ve put together a complete system where no individual part is more than $3000 and most are much less – this approach gives a huge degree of flexibility. Each component stands as what I’d hope is best in its class so you can look to put any one of them in your own system.
I’m intentionally using both analogue and digital sources, and the aim is to be able to appreciate both in equal measure.
On the analogue side, we have the Consonance Wax Engine turntable, fitted with the new Dynavector 10X5mk2 high output moving coil cartridge. The digital foil for this is the NuPrime CDP-9 player and DAC – this deals not only with CD but has multiple digital inputs allowing you to stream in from smartphone, network, TV and more.
In keeping with the ethos of separate components we have NuPrime’s remarkable little HPA-9 analogue preamplifier. This is the unsung hero in the NuPrime range – resolutely analogue and running in pure Class A, you couldn’t ask for a simpler product that sounds great and even has an excellent phono stage built in. Originally intended as a headphone amplifier (and there are 3 outputs for this), I’ve found it to be a supremely capable preamplifier that adds quality and drive to almost any system.
Match this with the proven STA-9 120 watt power amplifier and you have a combination that will make the most of almost any form of music coming and and drive any speaker system you wish to connect. And don’t forget the STA-9 can be easily bridged so you can upgrade your system to two mono 280 watt power amps at any stage in the future.
We’ve been completely spoilt for choice with new speakers lately – the new Monitor Audio Silver series or Studios would be obvious choices for this system. But we’ve always loved what Sonus faber do and right now the Chameleon T’s are by far our best value speaker proposition – these are a full sized floor standing speaker the combine the essential ‘voice’ of Sonus faber with the efficiency, depth and solidity you’d expect with two bass drivers in a generously ported cabinet that stands around 1m high. Throw in a choice of Italian racing red or beautifully finished walnut side panels and you have a speaker system that looks every bit as good as it sounds.
Combined with the NuPrime electronicsand the Wax Engine turntable, the Chameleons do pretty much everything you could ever hope for – above all they produce the kind of sound that you can just fall into – rich and warm but always involving enough to keep you coming back for more.
Good as all the individual parts are, it’s the connections that make them work and turn it into a functioning system. The timely arrival of a new generation of cables from Keith Eichmann delivered a transparency and balance that is difficult to describe but easy to understand once you hear it. As it stands, this system includes two of the new ‘special’ gPower3 AC power cables, a couple of pairs of the the new QFlow3 analogue interconnects, a set of 2m QFlow7 speakers cables plus the matching bi-wire jumpers. And from the turntable we use a custom made Mogami interconnect with the KLEI Absolute Harmony RCA plugs – this ensures a complete absence of hum which is often the by-product of in -ine power supplies.
It says something about how I regard the importance of connections that when we do a quick add up of all the cables used, if considered as a component, they are the most costly part of this system. Sound crazy? My question to you would be what do you think would make this system perform at a higher level for less? We could change individual components, but would they really improve the system as a whole? And anyway, it would be easy enough to select Keith’s entry level KLEI cables which deliver a remarkably consistent performance – this would quickly bring the total back in line with the individual components.
The nature of component systems is that they are often built up over time – so you may only take one or two parts of the above system as being relevant to you. Think of it as a bit of a real world testbed.
What you’ll find striking is that you could migrate from the little D-Stream system in my office, to the NuPrime 9 based system above, and then to the boots and all Well Tempered/Nuprime Evolution set up, and not feel short changed at any step. Obviously as we go up there are marked improvements in qualities such as detail and precision, a vast increase in available power and dynamics. But each gets to the heart of music and is genuinely enjoyable. We’re not about audio elitism – I’m happy to work at the level you are comfortable with and will do my best to put together the best sound at whatever that happens to be.
Consonance Wax Engine Turntable $1695
Dynavector DV 10X5Mk2 $1100
NuPrime CDP-9 player and DAC $2800
NuPrime HPA-9 preamp $1250
NuPrime STA-9 power amplifier $1250
Sonus faber Chameleon T speakers – on special – were $5000+ Now $2700 (red panels) $3000 (walnut)
KLEI gPower3 AC cables 1m $750
KLEI QFlow3 Interconnects $900
KLEI QFlow 7 Speaker cables 2m$1575
KLEI Q7 Bi-wire jumpers $320.
At the same time as I’ve been writing this, my partner Carolijn has been working through the new Vifa range of wireless speakers from the remarkable little Reykjavik (just $429) though to their elegantly proportioned Stockholm ($2700). Read her take here.
The new Evolution One Mono Power Amplifiers from NuPrime:
Reading about, and listening to music are quite different things and the subject of some great on-going conversations I’ve been having with my clients. You’ll be well aware that I try to best articulate what I hear with new audio components – turning it into a readable and informative summary so you can make the choice as to whether a particular item or component may be just what you are after, or something that you really didn’t know you needed (but do…)
The latest missive deals with the new flagship models from NuPrime – the Evolution One Mono Power Amplifiers. This has been one of the most difficult reviews I’ve had to write – not because of any problems but because the NuPrimes have proved to be so far ahead of anything else I’ve ever dealt with.
The new D-Stream WAMP-200SB amplifier, and new KLEI plugs & cables:
On sound quality alone, the D-Stream stands as the best sub-$1000 amplifier I’ve had the pleasure of listening to. Plus I have new cables and plugs from KLEI. Given all these developments I’ve put together a special demonstration pack so you can introduce yourself to the KLEI range and hear just how great an improvement you can get when you combine all of the elements.
While loudspeakers which come in at over 20,000 euro are going to be but a dream for most of us, the review linked to below is worth reading, not only to gain an insight into the serious high end, but also to see how some much more affordable products we put in NZ homes rate in this context. You’ll see the PrimaLuna tube amplifiers finds honourable mention and the NuPrime ST-10 gets an even more enthusiastic recommendation.
‘the ST-10 really brings the Sabrinas to life! Where all other transistor amps seemed dynamically a little restrained and only the PrimaLuna provided the kind of subjective dynamic swing that I crave, the NuPrime ST-10 has a kind of energetic presence that none of the other amps (transistor and tube) could match. Transient crispness and dynamic impact are really startling, better than with any of the other amps. Bass with the ST-10 is also incredible, not in a big and fat kind of way, but tuneful and articulate with just the right amount of pressure. Meanwhile the NuPrime’s very pure tonality and open and communicative character further increase the Sabrina’s timbral believability.’
We’ve also got some really exciting news from NuPrime in the last few days – the are 3 new high end amplifier models on the way. First up will be a mono version of the ST-10 above – the new ST-10Ms will be much more powerful, and even better sounding – the perfect upgrade for anyone who wants more out of their music.
Even better will be the new Reference 20E. Like the ST-10M above these are mono amplifiers, but each around twice the size (although this only makes them normal width and they’re still in a slimline profile.) This is a completely new design from Reference 20. which will be a big improvement on ST-10M and that will surpass Ref 20’s 420 watts per channel in power and resolution.
We hope to have the new ST10Ms here before the end of January and the Reference 20Es shortly afterwards. And offer generous trade in’s on existing NuForce and NuPrime models.
Reacquaint yourself with the NuPrime 10 products here.
We’ve continued to enjoy the new Monitor Audio Silver 6G 300s since we first posted the first full review of this model here. Just to show we’re not too far off the mark in our praise of these speakers, the Monitor Audio Silver 300 has received the prestigious Product of the Year award from The Absolute Sound at their High End Audio Product of the Year Awards.
In their January 2018 issue, Robert Harley described the Silver 300 as having “a compelling array of musical virtues”. This included, “terrific speed on transients, effortless reproduction of dynamics, and overall sense of musical coherence.” The bass was also praised, with Robert saying it is “detailed and resolved, providing a clear sense of pitch”.
The full feature will be in The Absolute Sound: Issue #279.
Add this to the fourWhat Hi-Fi Product of the Year awardswhich they have just received for 2017 and it’s clear that these are speakers you should seeking out. We’ve had a number of enquires lately from our original Image pages – we liked these speakers a lot at the time and really felt there was a case for unconditional support of NZ made.
But the reality is that overseas specialists have upped the rate of development, producing better and better products which now eclipse them. That said – we still work with Gary Morrison and Ross Stevens at Pure Audio so if there is a niche for the local product we’ll be there. And it’s worth knowing that there is NZ input in products from Dynavector and the Well Tempered Turntables but these days it’s all about collaboration and going to where the best resources are.
Working from home has given me much more time to both listen and write. For analogue enthusiasts, you may have missed them the first time around but we’ve got new pages up on both the Well Tempered Simplex 2 turntable and the Dynavector cartridges. What has been most striking for me that with all the components and systems we’ve set up in our new home showroom, the improvements made over the run in period (let’s not tempt fate and call it burn in) have been greater than we’ve ever experienced before – and the time involved is also stretching out. It’s not that they aren’t sounding good from the outset – but that one, two or even three months down the track, were still getting moments where it’s become obvious that the sound quality has stepped up significantly from the previous days.
Our partnership with Keith Eichmann and his KLEI cable range has a lot to do with this. I never would have credited the scale of improvements made by these cables unless I’d heard it first had but every few weeks we get vindication in feedback from clients. We’re getting much greater transparency in all our systems because of this, and not only do the cables also have a well documented run in period of 300 hours or more, but they make the progress of all the other components in the system much more obvious. So if you combine the individual effects of each components and cable, by the time we look at a system as a whole, the concept of running in has gone from subtle to transformative – even on systems that we might have regarded as quite modest.
But enough of in-doors pursuits. It’s a much better summer than last and we aim to get out and about in this beautiful island over the next few months. I’ve just discovered Kā Huru Manu – The Ngāi Tahu Cultural Mapping Project. This fantastic site is dedicated to recording and mapping the traditional Māori place names and associated histories in the Ngāi Tahu rohe (tribal area). Place names are tangible reminders of history and values. They represent a significant symbol of the Ngāi Tahu historical association and relationship with the landscape.
My own knowledge of the history of Te Waipounamu has a massive hole in the middle – a degree in geology informed an understanding of the physical island and timespans of millions of years. And I, like many, grew up with a very conventionally edited story of our colonial history. To know where you are going, you have to learn about the ground you stand on and respect the people that came before you – Kā Huru Manu is the perfect place to start.
So that’s it from us for this year – we wish you all the best and look forward to hearing from you in 2018.